Industry

Cybersecurity for water and municipal utilities

Pumping stations, treatment works and dams are spread across a large area and controlled remotely. CUBRA hides them from the internet and lets in only your own dispatcher.

What can happen

No water within an hour

Utilities rarely have strong IT protection – and attackers know it.

Changed chemical dosing

Chemical dosing at the treatment works is changed.

Pumps stopped

A district without water.

Release of untreated water

The sewerage system discharges waste water into the river.

Ransomware

The control room sees nothing.

!
A real case – 2023

In the US, a controller at a water supply station was hacked – its screen displayed the attackers’ message.

Where CUBRA Node goes

CUBRA Node Edge at every station

The CUBRA Node security gateway sits at the pumping station or treatment works. The link to the control centre goes only over our channel.

  • CUBRA Node Edge for remote stations
  • Alarms to the duty officer
  • Your equipment stays as it is
Internetno access to equipmentService companyonly via our channelCUBRA NodestationPumpscontrolChemicalsdosingSensorslevel, qualityCamerasrecorder onlyOfficestaff PCsSegments cannot see each other: a hacked camera cannot reach the pumps
What the gateway does

Six levels of protection

Hides it from the internet

There is no way to reach your pumps, dosing and sensors from outside: they cannot be seen from the internet, whatever vulnerabilities they may have.

Splits it into segments

Each group of devices works in its own segment (a separate part of the network): a hacked camera cannot reach the pumps.

Lets service in only via our channel

The service company gets in through our secure channel. Every login is logged, and access opens for the duration of the work and closes by itself.

Understands the “language of equipment”

CUBRA Node examines the commands equipment receives over the network: each segment gets only the commands it needs, and the gateway holds back the rest (equipment command filter — after release).

Holds back dangerous commands (after release)

Doubling the chlorine dose will not get through silently – the person responsible gets an alarm at once.

Knows every device

CUBRA Node finds all devices, their firmware and known vulnerabilities by itself – and suggests what to do.

Who exactly it is for

Where we help

Water treatment

Chemical dosing makes the water safe. A changed dose means dangerous water in the city’s taps.

What we offer
What is connected and how we handle it
Chemical dosing

Dosing units add chemicals on the control room’s commands. We place them in a closed segment; CUBRA Node holds back any command to change the dose beyond the permitted limits, and the control room receives an alarm.

Water quality sensors

The sensors show what water is going to the city. We place them in a separate segment whose data goes only to the log and the control room, so readings cannot be faked from another part of the network.

Cameras

A camera should send video only to the recorder. We put cameras in a separate segment and hide them from the internet; if a camera tries to scan the network or send data outside, it is isolated and the duty officer gets an alarm.

What it protects against
  • Unsafe water
  • Tampered readings
How we connect it
  1. We install CUBRA Node Edge at every station
  2. We split pumps, dosing, sensors and cameras into segments
  3. We connect the stations to the control room over our channel
  4. We switch on alerts for dangerous commands (after release)

Sewerage

Pumps at sewage stations keep waste water out of rivers and basements.

What we offer
What is connected and how we handle it
Pumps

The pumps start and stop on the control room’s commands. We place them in a closed segment that accepts commands only from the control room; CUBRA Node holds back a command to stop the pumps and raises an alarm.

Level sensors

Level sensors tell the system when to start the pumps. We place them in a separate segment whose data goes only to the control room, so nobody can fake the readings and “put the pumps to sleep”.

What it protects against
  • Sewage discharge
How we connect it
  1. We install CUBRA Node Edge at every station
  2. We split pumps, dosing, sensors and cameras into segments
  3. We connect the stations to the control room over our channel
  4. We switch on alerts for dangerous commands (after release)
What is connected and how we handle it
Pumps

The pumps are run from the control room. We place them in a closed segment and carry the link to the control room only over our channel. CUBRA Node holds back a command to stop all the pumps and raises an alarm.

Remote stations

Some stations are located where there is no internet. We connect them to the dispatcher through CUBRA Offline Gateway (USB stick, data diode), so commands cannot be swapped on the way (CUBRA Offline Gateway — after release).

What it protects against
  • A district without water
How we connect it
  1. We install CUBRA Node Edge at every station
  2. We split pumps, dosing, sensors and cameras into segments
  3. We connect the stations to the control room over our channel
  4. We switch on alerts for dangerous commands (after release)

Dams

The dam gates regulate the water level downstream.

What we offer
What is connected and how we handle it
Gate control

The gates open on the dam control room’s commands. We place the controls in a closed segment; CUBRA Node holds back a command for an unplanned release and raises an alarm.

What it protects against
  • Unplanned release
How we connect it
  1. We install CUBRA Node Edge at every station
  2. We split pumps, dosing, sensors and cameras into segments
  3. We connect the stations to the control room over our channel
  4. We switch on alerts for dangerous commands (after release)

Irrigation canals

Canal pumping stations are spread over dozens of kilometres.

What we offer
What is connected and how we handle it
Canal pumps

The pumps are run from a central site. We place them in a closed segment and connect them to the centre over our channel, so an outside command cannot stop a pump.

What it protects against
  • Irrigation stopped
How we connect it
  1. We install CUBRA Node Edge at every station
  2. We split pumps, dosing, sensors and cameras into segments
  3. We connect the stations to the control room over our channel
  4. We switch on alerts for dangerous commands (after release)

Waste recycling

Sorting lines and furnaces run non-stop, and a furnace failure means emissions.

What we offer
What is connected and how we handle it
Lines and furnaces

Lines and furnaces run on commands from their own control system. We place them in a separate segment that accepts only those commands; CUBRA Node holds back unusual ones and raises an alarm.

Office

Staff computers sit in a separate segment. Malware most often arrives here by email, but there is no path from this segment to the equipment, so an infected PC will not stop the site from working.

What it protects against
  • Shutdown
  • Emissions
How we connect it
  1. We install CUBRA Node Edge at every station
  2. We split pumps, dosing, sensors and cameras into segments
  3. We connect the stations to the control room over our channel
  4. We switch on alerts for dangerous commands (after release)
Several sites

All stations in one dashboard

The dispatcher sees every station, level and alarm.

  • The same rules for all sites in one go
  • Alarms sent to the duty officer’s phone
  • Log of service company logins
And people too

Secure communication for staff

Dispatchers and crews stay in touch in CUBRA Messenger.

  • Messages, calls, mail, files
  • Works on inexpensive phones

FAQ – Water and utilities

How do I protect pumping stations and treatment plants from hacking?

Control is hidden from the internet, and commands are accepted only from your dispatcher. Doubling the chlorine dose won’t go unnoticed – the dispatcher gets an alert immediately.

Can old equipment be protected without replacing it?

Yes. CUBRA Node lets only the necessary commands through to the equipment, and the equipment itself stays unchanged.

How do I connect many stations across a city or district?

Each station has a compact CUBRA Node Edge linked to the centre by a secure channel. Everything is in one dashboard.

What happens during an internet or power outage?

Protection at the station works independently. Between stations, messages can be sent without internet through CUBRA Offline Gateway (CUBRA Offline Gateway — after release).

See also: ICS cybersecurity: where to start.