Industry

Cybersecurity for buildings, residential complexes and owners’ associations

Lifts, heating, fire alarms and door intercoms have long been on the network – often the same one as residents or tenants. CUBRA separates them.

What can happen

A building that works against its people

Attackers have already got into major companies through a ventilation contractor.

Doors open to strangers

Access is opened to strangers or blocked for your own people.

Lifts stopped

A lift stops with people inside.

A silent fire alarm

The alarm stays silent during a fire.

No heating

Heating is switched off in winter.

!
What has already happened

There have been cases where a breach of a large retail chain began with access held by a contractor who maintained the ventilation, and ended with the theft of bank card details of millions of customers.

Where CUBRA Node goes

CUBRA Node Rack in the building server room

The CUBRA Node security gateway separates building systems from residents or tenants. Lift and ventilation service access goes only over our channel.

  • Fire alarm in a closed segment
  • Contractors connect only over our channel
  • Your equipment stays as it is
Internetno access to equipmentService companyonly via our channelCUBRA Nodebuilding server roomLiftsservice – our channelHeatingventilation, heating substationFire alarmclosed segmentAccess controlintercoms, doorsResidentstenantsSegments cannot see each other: a tenant’s infected PC cannot reach the lifts
What the gateway does

Six levels of protection

Hides it from the internet

There is no way to reach your lifts, heating and fire alarm from outside: they cannot be seen from the internet, whatever vulnerabilities they may have.

Splits it into segments

Each group of devices works in its own segment (a separate part of the network): a tenant’s infected PC cannot reach the lifts.

Lets service in only via our channel

The service company gets in through our secure channel. Every login is logged, and access opens for the duration of the work and closes by itself.

Understands the “language of equipment”

CUBRA Node examines the commands equipment receives over the network: each segment gets only the commands it needs, and the gateway holds back the rest (equipment command filter — after release).

Holds back dangerous commands (after release)

Opening every door at night will not get through silently – the person responsible gets an alarm at once.

Knows every device

CUBRA Node finds all devices, their firmware and known vulnerabilities by itself – and suggests what to do.

Who exactly it is for

Where we help

Business centres

A business centre has dozens of tenants and shared building systems. Major breaches have already started with a ventilation contractor’s password.

What we offer
What is connected and how we handle it
Tenants

Each tenant company gets its own segment with internet access. A virus in one office cannot see the neighbours or the building systems.

Ventilation, heating, lifts

These systems are connected so contractors can monitor them remotely. We place them in a separate segment; a contractor connects only over our channel, and every sign-in is recorded in the log.

Fire system

The fire system is connected so the dispatcher can see its status. We place it in a closed segment with no path at all from the tenants’ network or the internet. Any attempt to switch it off triggers an alert for the dispatcher.

Access control and turnstiles

Turnstiles and locks let people through with cards. We place them in a separate segment that can be controlled only from the security desk, so doors cannot be opened from a tenant’s office or from the internet.

Visitor Wi-Fi

Guests connect to a separate network that offers internet access only. No device on the site is visible from it, so even a guest’s infected phone finds nothing.

What it protects against
  • Entry through a contractor
  • Entry through a tenant
  • Silenced fire system
How we connect it
  1. CUBRA Node finds the building systems by itself
  2. We split lifts, heating, the fire system, access control and residents into segments
  3. We connect contractors through our channel
  4. We switch on alerts for the dispatcher

Residential complexes and owners’ associations

Door entry phones, cameras, meters, the heat substation and lifts – often on one router in the basement.

What we offer
What is connected and how we handle it
Door entry phones

The door entry phone opens the entrance for residents and visitors. We place the entry phones in a separate segment: the door can be opened only from the entry phone itself or from a resident’s app, not from the internet.

Building heat substation

The heat substation is set up by a service company. We place it in a separate segment; the company changes settings only over our channel. CUBRA Node will hold back an attempt to switch off heating in winter and raise an alert.

Cameras

A camera should send video only to the recorder. We put cameras in a separate segment and hide them from the internet; if a camera tries to scan the network or send data outside, it is isolated and the duty officer gets an alarm.

Lifts

The lift is connected so the service company can see faults. We place it in a separate segment that the company accesses only over our channel; there is no path to the lift from the residents’ network.

What it protects against
  • Entrance doors opened
  • Heating cut off
  • Leak of camera recordings
How we connect it
  1. CUBRA Node finds the building systems by itself
  2. We split lifts, heating, the fire system, access control and residents into segments
  3. We connect contractors through our channel
  4. We switch on alerts for the dispatcher

Lifts

The lift is connected to the network so the service company can see faults and people who are stuck.

What we offer
What is connected and how we handle it
Lift control

We place the lift control in a separate segment. Only the service company can access it, and only over our channel; there is no path from the residents’ or offices’ network. CUBRA Node will hold back an outside command to the lift, and the duty officer will receive an alert.

Emergency call button in the car

The button connects a person in the lift car to the dispatcher. This connection takes a separate path, so it works even when the rest of the network is under attack.

What it protects against
  • Lift stopped with people inside
  • Outside commands
How we connect it
  1. CUBRA Node finds the building systems by itself
  2. We split lifts, heating, the fire system, access control and residents into segments
  3. We connect contractors through our channel
  4. We switch on alerts for the dispatcher

Heating and ventilation

The building management system controls temperature and air in every room – and is often open to the contractor over the internet.

What we offer
What is connected and how we handle it
Building management system

The contractor sets up the system remotely. We place it in a separate segment and hide it from the internet; the contractor connects only over our channel and only for the duration of the work. CUBRA Node will hold back commands that switch off heating in winter or ventilation in the server room, and raise an alert.

Sensors and valves

Sensors measure temperature, and valves regulate it. We place them in a separate segment that accepts commands only from the building management system, so an outside device cannot open or close a valve.

What it protects against
  • Entry through a contractor
  • No heating
  • Server room overheating
How we connect it
  1. CUBRA Node finds the building systems by itself
  2. We split lifts, heating, the fire system, access control and residents into segments
  3. We connect contractors through our channel
  4. We switch on alerts for the dispatcher

Fire alarms

The fire system must work under any conditions – even if the rest of the network has been hacked.

What we offer
What is connected and how we handle it
Control panel and detectors

The control panel collects signals from the detectors and sounds the alarm. We place them in a closed segment with no path from offices, Wi-Fi or the internet. Any attempt to switch off the alarm system or change its settings triggers an alert for the person in charge.

Link to the fire service

A fire signal must reach the fire service. It travels over a separate channel that does not depend on the office network, so a virus in the office cannot stop it.

What it protects against
  • Silence during a fire
  • False alarms
How we connect it
  1. CUBRA Node finds the building systems by itself
  2. We split lifts, heating, the fire system, access control and residents into segments
  3. We connect contractors through our channel
  4. We switch on alerts for the dispatcher

Access control

Cards, turnstiles and electronic locks are controlled from a single server.

What we offer
What is connected and how we handle it
Door controllers

Controllers unlock doors on commands from the access server. We place them in a separate segment that accepts commands only from that server. Mass door opening at night triggers an alert.

Access server

The server decides whose card opens which doors. We place it in a separate segment; every change of permissions and every opening is recorded in the log, so nobody can quietly issue themselves an “all doors” card.

What it protects against
  • Doors open to strangers
  • Own staff locked out
How we connect it
  1. CUBRA Node finds the building systems by itself
  2. We split lifts, heating, the fire system, access control and residents into segments
  3. We connect contractors through our channel
  4. We switch on alerts for the dispatcher
Several sites

All buildings in one dashboard

The management company sees every building, lift and alarm.

  • The same rules for all sites in one go
  • Alarms sent to the duty officer’s phone
  • Log of service company logins
And people too

Secure communication for staff

Property managers, dispatchers and residents stay in touch in CUBRA Messenger.

  • Messages, calls, mail, files
  • Works on inexpensive phones

FAQ – Buildings and owners’ associations

How do I separate lifts and heating from residents’ and tenants’ networks?

CUBRA Node puts lifts, heating, the fire system and door intercoms in separate segments. Residents’ and tenants’ networks can’t see them.

How do I work with service companies that maintain the building?

A service company gets in only through a secure CUBRA channel. Access opens for the duration of the work, and every sign-in is recorded in the log.

What happens if someone tries to open all the doors at night?

Such a command won’t go unnoticed – the person in charge gets an alert on their phone immediately.

Is CUBRA suitable for an owners’ association?

Yes. For a block of flats, a compact CUBRA Node Edge is enough, and the chair of the owners’ association or the management company sees everything in one dashboard. We’ll put together the exact configuration and price at the demo, based on the number of your sites and people.